PISTON PUMP (IMPLEMENT, PILOT, AND STEERING) REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Disconnect hose (22) and remove and discard O-ring (23) from T (24) and position hose aside.
Remove four bolts (25), washers (26), and O-ring (27)
from manifold (28) and position manifold aside. Dis-
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in
injury or death to personnel.
N OT E
Pump assembly weighs 101 lb (46 kg).
Attach lifting equipment to pump assembly (12).
With assistance, remove two bolts (29), washers (30), O-rings (31 and 32), and pump assembly (12) from machine. Dis-