EVAPORATOR CORE REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Remove bolt (30) from case assembly (8). Cut and discard gasket (31).
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug
openings after removing lines. Contamination of system could result in premature failure.
N OT E
· Tag hoses prior to removal to ensure correct installation.
· Use a container to catch any hydraulic oil that may drain from hoses or system. Dispose of oil IAW local
policy and ordinances. Ensure all spills are cleaned up.
Remove two nuts (32) and washers (33) from evaporator coil (23).
Remove evaporator coil (23) from case assembly (8).
Remove and discard O-ring (34) from evaporator coil