FRONT TILT LEVER AND LINK REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Remove and discard two O-rings (27) from link
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in
injury or death to personnel.
N OT E
Link assembly weighs 105 lb (48 kg).
Use lifting equipment to support link assembly (23).
Remove bolt (28), washer (29), and pin assembly (30)
from arm (31).
With assistance, remove link assembly (23) from arm