FRONT TILT LEVER AND LINK REPLACEMENT - CONTINUED
INSTALLATION - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in
injury or death to personnel.
N OT E
Lever assembly weighs 130 lb (59 kg).
Use lifting equipment to position lever assembly (16) on link assembly (23).
Install pin assembly (22), washer (21), and bolt (20)
through lever assembly (16).
Remove and discard tiedown strap from tilt cylinder