REAR TILT LEVER AND LINK REPLACEMENT - CONTINUED
TILT LINK REMOVAL - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in
injury or death to personnel.
N OT E
Rear link assembly weighs 95 lb (43 kg).
Use lifting equipment to support rear link assembly
With assistance, remove retaining ring (12) from pin
Remove pin assembly (13) from rear lever assembly
Remove rear link assembly (4) from rear lever assem-
Remove lip seal (32) from rear link assembly (4).
Repeat for opposite side of bore. Discard seals.