LIFT ARMS REPLACEMENT - CONTINUED
INSTALLATION - CONTINUED
Remove strap to release rear lever assembly (16) from
rear link assembly (21). Raise rear lever assembly and
remove wood blocks.
Apply grease to pin assembly (20). Install pin assembly on lift arm assembly (1) to secure rear lever assembly (16) and
rear link assembly (21).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure any lifting equipment used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury or
death to personnel.
N OT E
Pin assembly weighs 90 lb (41 kg).
Install spacer (19), washer (18), and bolt (17) on pin