CONFIGURE MACHINE FOR TRANSPORT - CONTINUED
ROPS/FOPS INSTALLATION - CONTINUED
CAU T I ON
Ensure top portion of ROPS/FOPS cab is lowered straight down until fully seated on lower. Failure to do so
could result in damage to operator station and operator components.
Slowly lower ROPS/FOPS onto operator station,
aligning mounting bolt holes in ROPS/FOPS.
Lower ROPS/FOPS until fully seated.
Remove elastic cord from rear wiper arm.
N OT E
Movement in wedge pins is normal during
installation of bolts.
Loosely install four bolts (2, 3, 4, and 5) at each
corner of cab.
Tighten four bolts (2, 3, 4, and 5) at corners of