ELECTRICAL SYSTEM TESTS, INSPECTIONS, AND ADJUSTMENTS - CONTINUED
ENGINE FAN CONTROL SOLENOID CIRCUIT TEST - CONTINUED
Expected Results. All connectors, pins, and sockets should be completely coupled and/or inserted and harness and
wiring should be free of corrosion, abrasion, or pinch points.
If results are OK, proceed to step 2.
If results are not OK, replace wiring harness in question (WP 0195 00 thru WP 0201 00). Ensure seals are
properly in place and connectors are securely connected. Verify repair eliminates problem.
Check for active diagnostic codes.
Place battery disconnect switch in OFF position (TM 5-3805-291-10).
Place battery disconnect switch in ON position (TM 5-3805-291-10).
Monitor Active Diagnostic Code screen on ET. Check and record any active diagnostic codes.