VALVE COVER AND BASE REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
CAU T I ON
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug open-
ings after removing lines. Contamination of system could result in premature failure.
N OT E
Tag hoses prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
Loosen clamp (15) and disconnect hose (16) from
valve cover base (10).
Remove 15 bolts (17), washers (18), and clamp loop
(19) from valve cover base (10).
Remove valve cover base (10) and gasket (20) from machine. Discard gasket.