TURBOCHARGER ASSEMBLY, AIR LINES, AND OIL LINES REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Loosen clamp (14) and disconnect tube (4) from muf-
fler (15). Remove tube from machine.
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Turbocharger weighs 75 lb (34 kg).
Attach lifting equipment to turbocharger (5).
Remove four nuts (16) from turbocharger (5) and, with assistance, remove turbocharger and gasket (17) from machine.
Remove two bolts (18), washers (19), O-ring (20), and tube (13) from machine. Discard O-ring.
Disconnect line (8) from fitting (21) and remove line from machine.
Remove fitting (21) from filter base (22).
Remove two O-rings (23) from line (8) and fitting (21). Discard O-rings.