FUEL TANK REPLACEMENT - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Fuel tank weighs 550 lb (250 kg).
With assistance, use hydraulic jack to position fuel
tank (2) on machine.
Install eight mounts (15), four spacers (14), washers
(13), and bolts (12) on both sides of fuel tank (2).
Connect sending unit connector (7) to wiring harness
Install nut (9), washer (10), and sending unit connec-
tor (7) on machine.
Install new tiedown strap (11) on sending unit wire
Connect hose assemblies (3 and 4) with new O-rings
(5) to fuel tank (2).