BELT TENSIONER AND IDLER PULLEYS REPLACEMENT - CONTINUED
CLEANING AND INSPECTION
Clean all parts and mating surfaces with dry rag.
Inspect all parts for wear, pitting, cracks, or corrosion and replace if necessary.
Position three idler pulleys (5) on engine and install bolts (4) in idler pulleys. Tighten bolts to 37 ± 4 lb-ft (50 ± 5 Nm).
With assistance, position belt tensioner (3) on engine and install bolt (1) and new lockwasher (2) in belt tensioner.
WAR N I N G
Before operating the machine, secure the steering frame lock in the stowed position. DO NOT operate
machine with steering frame lock connected. Failure to lock steering frame lock into the stowed position
before operating can result in loss of steering and injury or death to personnel.
Secure steering frame lock in stowed position (TM 5-3805-291-10).
END OF WORK PACKAGE
0047 00-3/(0047 00-4 Blank)