HOOD TILT ACTUATOR REPLACEMENT - CONTINUED
INSTALLATION - CONTINUED
Place cover (8) in position and install four washers (7) and bolts (6) on cover.
Place backup alarm (5) in position and install four washers (4) and bolts (3) on backup alarm.
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
The hood weighs 400 lb (181 kg).
Remove lifting equipment from link bracket and hood
Remove link bracket from hood (2).