FUEL LEVEL SENDING UNIT REPLACEMENT - CONTINUED
WARN I N G
DO NOT perform fuel system checks, inspections, or maintenance while smoking or near fire, flames, or
sparks. Fuel may ignite, causing injury or death to personnel or damage to equipment.
N OT E
Apply thin coat of gasket cement to fuel sending unit prior to installation.
Install fuel level sending unit (9) on fuel tank (10).
Install five washers (8) and bolts (7) on fuel level
sending unit (9).
Connect sending unit connector (2) to wiring harness
Install nut (4), washer (5), and sending unit connector
(2) on machine.
Install new tiedown strap (6) on sending unit wire (3).
Set battery disconnect switch to ON position (TM 5-3805-291-10).
Set engine start switch to ON position (TM 5-3805-291-10).
Check fuel level gage for correct fuel level sending unit operation (TM 5-3805-291-10).
END OF WORK PACKAGE
0080 00-3/(0080 00-4 Blank)