TRANSMISSION SERVICE - CONTINUED
Install magnet assembly (9) and screen (8) in transfer case housing (7).
Apply a thin coat of clean lubricating oil to new O-ring (6) and install O-ring and strainer cover (5) on transfer case
Install four washers (4) and bolts (3) in strainer cover
Install new O-ring on drain plug (1).
Install transmission oil drain plug (1) in bottom of
transfer case (2).
N OT E
Transmission oil filler cap and tube
are located on left-side of machine.
Transmission capacity is 13.2 gal.
Remove transmission oil filler cap (10) from fill
Fill transmission with oil.
WARN I N G
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-
rial. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-venti-
lated areas. Keep away from open flames and other sources of ignition. Failure to do so may result in injury
or death to personnel.
Use solvent cleaning compound to clean and inspect
transfer case breather (12) located on top of transfer