STEERING CONTROL VALVE MAINTENANCE - CONTINUED
REMOVAL - CONTINUED
Remove two bolts (15) and washers (16) from flange
Remove flange (17), O-ring (18), spacer block (19),
and seal (20) from steering control valve assembly (5).
Discard O-ring and seal.
Disconnect face port line (21) from fitting (22).
Remove three bolts (23) and washers (24) from steer-
ing control valve assembly (5).
WARN I N G
Use extreme caution when handling heavy
parts. Provide adequate support and use
assistance during procedure. Ensure that
any lifting equipment used is in good con-
dition and of suitable load capacity. Keep
clear of heavy parts supported only by
lifting equipment. Failure to follow this
warning may cause injury or death to per-
N OT E
Steering control valve assembly weighs 95 lb (43 kg).
With assistance, remove steering control valve assem-
bly (5) from frame (25).