STEERING CONTROL VALVE MAINTENANCE - CONTINUED
DISASSEMBLY - CONTINUED
Remove four bolts (37) and separate selector valve (38) from control valve (29).
Remove three fittings (39) and two O-rings (40) from selector valve (38). Discard O-rings.
Remove four bolts (41) and separate cover (42) from control valve (29).
Remove and discard two O-rings (43).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may cause injury or
death to personnel.
N OT E
Steering control valve assembly weighs 95 lb (43 kg).