ARCTIC HEATER INSTALLATION - CONTINUED
WARN I N G
DO NOT perform fuel system checks, inspections, or maintenance while smoking or near fire, flames,
or sparks. Fuel may ignite, causing injury or death to personnel or damage to equipment.
Fuel used in the performance of maintenance can be very slippery. Immediately wipe up any spills.
Failure to follow this warning may result in injury to personnel.
N OT E
Apply a thin coat of coolant to all coolant fitting O-rings before installation.
Apply a thin coat of fuel to fuel line fitting O-rings before installation.
When applicable, reuse existing machine hardware for arctic heater installation.