COOLING SYSTEM PACKAGE (RADIATOR, FAN,
AFTERCOOLER, AND OIL COOLER) REPLACEMENT - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Cooling system package weighs 900 lb (408 kg).
Install two link brackets and attach lifting equipment
to cooling package (6). Position cooling package on
Install four washers (56) and bolts (55) on each side of
cooling package (6).
Install fuel cap (TM 5-3805-291-10).
Connect tube (53) to rubber sleeve (54) and tighten
two clamps (52).