REAR AXLE TRUNNION REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Remove lip seal (11) and sleeve bearing (12) from rear
support (4). Discard lip seal and bearing.
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Trunnion weighs 53 lb (24 kg).
Attach lifting equipment to trunnion (10).
With assistance, remove 12 bolts (13), washers (14),
and trunnion (10) from rear axle housing (15).