PISTON PUMPS (STEERING AND IMPLEMENT/PILOT) REPLACEMENT - CONTINUED
INSTALLATION - CONTINUED
Piston Pump (Steering)
N OT E
Apply a thin coat of clean oil to all
O-rings before installation.
Install two new O-rings (25) in fittings (24). Install fit-
tings on piston steering pump (2).
Install new O-ring (23) on coupling (22). Install cou-
pling on piston steering pump (2).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Piston steering pump weighs 120 lb (54 kg).
Attach lifting equipment to piston steering pump (2).
With assistance, position piston steering pump (2) and
install two washers (21) and bolts (20).
Install two washers (19) and bolts (18) on piston
steering pump (2).