BUCKET TILT LEVER AND LINK REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Place jack stand under bucket tilt link (1).
Remove bolt (12), washer (13), and spacer (14) from
pin assembly (15).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Tilt cylinder weighs 485 lb (220 kg).
Tooling weighs 75 lb (34 kg).