BUCKET LIFT ARMS REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
N OT E
Tag wiring harnesses prior to removal to ensure correct installation.
Disconnect two wiring harnesses (12) from lighting
Remove four bolts (10) and washers (11) from light-
ing assembly (9) and position aside.
WARN I N G
DO NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying pressure. Escap-
ing hydraulic fluid under pressure can penetrate the skin, causing injury to personnel.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulic lines. Failure to follow this warning may result in injury to personnel.
Hydraulic oil used in the performance of maintenance can be very slippery. Immediately wipe up any
spills. Failure to follow this warning may result in injury to personnel.
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug open-
ings after removing lines. Contamination of system could result in premature failure.