BUCKET LIFT ARMS REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
With assistance, remove bolt (27), washer (28), and
spacer (29) from rear pin assembly (3).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Rear pin assembly and tooling weighs 75 lb (34 kg).
With assistance, use lifting equipment to support puller assembly. Using Sleeve (Item 72, WP 0232 00), Nut, plain,
pin assembly (3).
Repeat steps 20 and 21 for front pin assembly.