BUCKET LIFT ARMS REPLACEMENT - CONTINUED
INSTALLATION - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury
or death to personnel.
N OT E
Lift cylinder weighs 550 lb (250 kg).
Use lifting equipment to position lift cylinder (4) on
With assistance, install pin assembly (2), spacer (7),
washer (6), and bolt (5) on machine.
Remove blocking from loader frame (8) that was used
to support lift cylinder (4).
Repeat steps 18 thru 20 for other side of lift cylinder
Raise lift arm (1) and remove stand assembly.
Install lift kickout position sensor and mounting bracket (WP 0085 00).
Install bucket (TM 5-3805-291-10).
Run engine and verify correct operation of bucket lift arms (TM 5-3805-291-10).
Shut down engine (TM 5-3805-291-10).
Check for leaks.
END OF WORK PACKAGE