Table 1. Preventive Maintenance Checks and Services (PMCS)
for the M400T and M400W SSL - Continued.
Cab Air Filter
b. Remove air filter from filter
Figure 52. Cab Air Filter.
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure when
drying parts with compressed air. Use a maximum of 30 psi (207 kPa) when cleaning components. DO NOT
direct compressed air against human skin. Make sure air stream is directed away from user and other
personnel in the area. To prevent injury, user must wear protective goggles or face shield. Failure to follow
this warning may result in injury to personnel.
Filter cannot be cleaned
c. Use compressed air to clean
excess dirt or debris from air
d. Clean filter compartment with a
e. Inspect air filter for tears or other Filter is torn or damaged.
f. Install air filter in filter
compartment, with air flow arrow
pointing to front of machine.
g. Install cover on filter
compartment and tighten three