WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting equipment used is in good condition
and of suitable load capacity. Keep clear of heavy parts supported only by lifting
equipment. Failure to follow this warning may result in injury or death to personnel.
N OT E
Counterweight bumper weighs 127 lb (58 kg).
1. Support counterweight bumper (Figure 1, Item 3) with lifting device.
2. Remove two bolts (Figure 1, Item 1), washers (Figure 1, Item 2), counterweight bumper (Figure 1, Item 3), and
two nuts (Figure 1, Item 4) from machine.
Figure 1. Counterweight Bumper Replacement.
3. Set counterweight aside.
END OF TASK
CLEANING AND INSPECTION
WARN I N G
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and
low toxic material. However, it may be irritating to the eyes and skin. Use protective gloves
and goggles. Use in well-ventilated areas. Keep away from open flames and other
sources of ignition. Failure follow this warning may result in injury or death to personnel.
1. Clean all parts (except rubber and plastic surfaces) and mating surfaces with solvent cleaning compound.