1. Remove and discard all tiedown straps (Figure 14, Item 2) from door switch cable (Figure 14, Item 1).
2. Disconnect electrical connector (Figure 14, Item 3) from door switch (Figure 14, Item 1).
3. Remove two bolts (Figure 14, Item 4), washers (Figure 14, Item 5), nuts (Figure 14, Item 6), star washers
(Figure 14, Item 7), washers (Figure 14, Item 8), and door switch (Figure 14, Item 1) from door frame.
Figure 14. Door Switch.
END OF TASK
CLEANING AND INSPECTION
WARN I N G
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and
low toxic material. However, it may be irritating to the eyes and skin. Use protective gloves
and goggles. Use in well-ventilated areas. Keep away from open flames and other
sources of ignition. Failure follow this warning may result in injury or death to personnel.
1. Clean all parts (except rubber and plastic surfaces) and mating surfaces with solvent cleaning compound.