Table 1. E0155 High Torque Converter Oil Temperature Event Code - Continued.
EID FMI CODE
TEST OR INSPECTION
Converter Oil Temperature
Event Code - Continued
Filler tube is under pressure. Transmission oil may be hot; open filler tube
cap slowly. Failure to follow this warning may result in injury to personnel.
4. Check for correct level of
Transmission Oil Level OK - Proceed
transmission oil (TM 5-3805-298-
to Test Step 2.
Transmission Oil Level Low - Add
transmission oil (TM 5-3805-298-10).
Proceed to Test Step 7.
Test Step 2. Inspect Transmission
Oil Cooler for Damage, Dirt, and
· Hot engine components can cause injury from burns.
· Before performing maintenance on machine, allow engine and
components to cool completely.
· Failure to follow this warning may result in injury or death to personnel.
Keep all parts clean from contaminants. Contaminants may cause rapid wear and
shortened component life.
1. Turn ignition switch and battery
disconnect switch to the OFF
position (TM 5-3805-298-10).