REAR MACHINE SUPPORT REMOVAL
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
Machine weighs approximately 27,320 lb (12,392 kg).
1. With assistance, using suitable lifting device, raise rear of machine.
2. Remove trestle jack stands (Figure 2, Item 2) from rear axle (Figure 2, Item 1).
3. Lower rear of machine.
Figure 3. Rear Support.
END OF TASK