Use extreme caution when handling heavy parts. Provide adequate support during
procedure. Ensure any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this
warning may result in injury or death to personnel.
Powerpack assembly weighs approximately 2,600 lb (1,179 kg).
5. Using lifting device, chain hoists and with assistance, position powerpack assembly in machine.
6. Install two washers (Figure 60, Item 2) and mounts (Figure 60, Item 3) on engine mount brackets
(Figure 60, Item 1).
Refer to removal for trestle position and height.
7. Position trestle under transmission.
8. Using lifting device and chain hoists, lower transmission onto trestle.
Left and right transmission mount bracket installation is identical. Left hand transmission
mount bracket shown.
There is a dowel on transmission for transmission mount bracket alignment. It may be
necessary to move transmission to allow transmission mount bracket removal.