Note position of washers and hardware aid installation.
12. Remove two nuts (Figure 3, Item 6), washers (Figure 3, Item 7), bolts (Figure 3, Item 4), four washers
(Figure 3, Items 3 and 2) and top engine mounts (Figure 3, Item 1) from engine mount brackets (Figure 3,
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
Engine weighs approximately 1,563 lb (709 kg).
13. Using lifting device, lift and support engine approximately 1/2 in. (12.7 mm).