Failure to ensure all valve links are correctly seated onto valve stems will cause
Install valve bridges as noted in removal.
1. Lubricate valve links (Figure 2, Item 1) with clean engine oil and install on valve stems (Figure 2, Item 2).
Install pushrods with cup facing upward. Ensure ball end is correctly seated in valve lifter.
Failure to follow this caution may result in engine damage.
Install push rods as noted in removal.
2. Lubricate 12 pushrod ends with clean engine oil and install pushrods (Figure 3, Item 4) on cylinder head
(Figure 3, Item 3).
3. Install machine bolts (Figure 3, Item 1) on rocker shaft (Figure 3, Item 2).