Fuel injectors must be reinstalled in original location in the cylinder head. Handle fuel
injector with care. Make a temporary identification mark on fuel injector. Failure to follow
this caution may cause engine damage.
6. Pry beneath six clamps (Figure 3, Item 3) to remove six fuel injectors (Figure 3, Item 2) and clamps (Figure 3,
Item 3) from cylinder head (Figure 3, Item 1).
Figure 3. Fuel Injector Removal.
Note location of sealing washers and O-rings to aid installation.
7. Remove six sealing washers (Figure 4, Item 1) and six O-rings (Figure 4, Item 3) from six fuel injectors
(Figure 4, Item 2). Discard sealing washers and O-rings.
Figure 4. Fuel Injector Seals.
END OF TASK