CLEANING AND INSPECTION
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Failure to follow this warning may result in injury or death to
1. If removed, install new seal (Figure 9, Item 3) on machine.
2. If removed, Install four new insulators (Figure 9, Item 1) on aftercooler (Figure 9, Item 2).
3. With assistance install aftercooler (Figure 9, Item 2) on machine.
Figure 9. Aftercooler.