RIGHT BATTERY BOX REMOVAL
Make sure battery disconnect switch is in OFF position before replacing battery box.
Failure to follow this warning may result in injury or death to personnel or damage to
Battery box cover and latch removal is only necessary if components are damaged.
Battery box can be removed with these components attached.
1. Remove four bolts (Figure 1, Item 2), washers (Figure 1, Item 3), and lid (Figure 1, Item 1) from battery box
(Figure 1, Item 4).
2. Remove cotter pin (Figure 1, Item 5), pin (Figure 1, Item 7), and latch (Figure 1, Item 6) from battery box
(Figure 1, Item 4). Discard cotter pin.
Figure 1. Battery Box Lid and Latch.