LO 5-3805-253-12
NOTES CONTINUED:
11. FINAL DRIVES. Check level each 50 hours.
Remove excess. Do not lubricate circle turn pinion or
Change gear lubricant only when required by
teeth.
maintenance repair action, contamination by water, or
other foreign material. After refill, operate for 5 minutes,
15. CIRCLE GEAR CASE. Check level each 50 hours.
check for leaks and bring oil to full mark.
Change gear lubricant only when required by
maintenance repair action, contamination by water, or
12. FAN HUB ASSEMBLY. For fan hubs having a lube
other foreign material.
After refill, operate for five
fitting, lubricate after 10 hours of operation with GAA.
minutes, check for leaks and bring oil to "FULL" mark.
13. STEERING GEAR. Check level each 50 hours.
16. LUBRICANTS. The following is a list of lubricants
Remove cover and pack with grease to cover worm shaft
with military symbols and applicable specification
as required.
numbers.
OE/HDO-MIL-L-2104
OEA-MIL-L-46167
14. CIRCLE. Clean circle wear surfaces with diesel
GO-MIL-L-2105
BFS-MIL-B-46176
fuel. Apply only diesel fuel to circle wear surfaces.
GAA-MIL-G- 10924
Copy of this Lubrication Order will remain with the
equipment at all times, instructions contained herein are
mandatory.
By order of the Secretary of the Army:
E.C. MEYER
General, United States Army
Chief of Staff
OFFICIAL:
ROBERT M. JOYCE
Major General, United States Army
The Adjutant General
DISTRIBUTION:
To be distributed in accordance with DA Form 12-25B,
Operator and Organizational maintenance requirements
for Graders.
TA 217754
P U. S. GOVERNMENT PRINTING OFFICE: 1983 O-407-876
CARD 8 of 8
