TM 5-2420-231-23-1
0050
Table 1. Rear Window Washer Does Not Operate - Continued.
050
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. Remove front instrument panel
Rear Window Washer Does
right-side cover (WP 0176).
Not Operate - Continued
3. Disconnect chassis options wiring
harness connector (WP 0007, Fig-
ure 42) from side options wiring
harness connector (WP 0007, Fig-
ure 43).
4. Using a digital multimeter, mea-
Resistance 5.0 Ohms or Less -
sure resistance between side
Replace side options wiring harness
options wiring harness connector
(WP 0255).
(WP 0007, Figure 139) terminal 2
Connect all wiring harness connectors.
and side options wiring harness
Proceed to Test Step 11.
connector (WP 0007, Figure 43)
Resistance Greater Than 5.0 Ohms -
terminal K. Resistance should be
Proceed to step 5.
5.0 ohms or less.
5. Remove air cleaner barrier curtain
(WP 0099).
6. Disconnect chassis options wiring
harness connectors (WP 0007,
Figure 136) from front options con-
sole wiring harness connectors
(WP 0007, Figure 135).
7. Install a jumper wire between
chassis options wiring harness
connector (WP 0007, Figure 42)
terminal K and machine ground.
8. Using a digital multimeter, mea-
Resistance 5.0 Ohms or Less -
sure resistance between chassis
Replace front console options wiring
options wiring harness connector
harness (WP 0163).
(WP 0007, Figure 136) terminal K
Remove jumper wire from chassis
and machine ground. Resistance
options wiring harness (WP 0007,
should be 5.0 ohms or less.
Figure 42) terminal K and machine
ground.
Connect all wiring harness connectors.
Install front instrument panel right-side
cover (WP 0176).
Install rear bezel on rear instrument
panel right-side cover (WP 0172).
Proceed to Test Step 11.
Resistance Greater Than 5.0 Ohms -
Replace chassis options wiring harness
(WP 0171).
Connect all wiring harness connectors.
Install rear bezel on rear instrument
panel right-side cover (WP 0172).
Install air cleaner barrier curtain (WP
0099).
Proceed to Test Step 11.
0050-10