TM 5-3805-255-14
0013
Table 1. Preventive Maintenance Checks and Services (PMCS) for H100C - Continued.
.
LOCATION
ITEM TO
NOT FULLY MISSION
CHECK/
SERVICE
ITEM NO. INTERVAL
CAPABLE IF:
PROCEDURE
Weekly
Boom Pivot
a. Wipe grease fittings clean with a
Class III oil leak from cylinder
38
Lubrication
evident.
rag.
b. Apply GAA grease to fittings (one
fitting at each boom arm). Wipe off
excess grease from fittings.
Figure 33. Boom Pivot Lubrication Point.
0013
Weekly
Boom Cylinder
a. Wipe grease fittings clean with a
39
Lubrication
rag.
b. Apply GAA grease to fittings (two
fittings at each pivot point). Wipe off
excess grease from fittings.
c. Inspect hydraulic hoses for
Cracks, splits, bulges, or soft
spots are evident in hoses, or
damage or leaks.
Class III leaks are evident.
0013-36