TM 5-3805-255-14
0013
Table 1. Preventive Maintenance Checks and Services (PMCS) for H100C - Continued.
.
LOCATION
ITEM TO
NOT FULLY MISSION
CHECK/
SERVICE
ITEM NO. INTERVAL
CAPABLE IF:
PROCEDURE
ARTICULATION
AREA
a. While intermediate drive block oil Class III oil leak evident.
Bimonthly
Intermediate
43
is at operating temperature, park
Drive Block Oil
loader on level ground, completely
Level
lower bucket, and apply parking brake
b. Remove intermediate drive block
oil level gauge and wipe it clean.
c. Insert oil level gauge as far as it
will go.
d. Remove oil level gauge again and
check level. If oil level is below full
mark, add intermediate drive block oil
as necessary. Refer to Table 2,
Lubricants, in this work package for
grade and quantity of fluid required.
e. Fill block through oil level gauge
hole. Refer to Table 2, Lubricants, in
this work package for grade and
quantity of fluid required.
0013-42
