TM 5-3805-255-14
0024
REMOVAL
00024
WARNING
Wear gloves when handling engine oil. If oil contacts skin, wash it off immediately. Failure
to follow this warning may cause injury to personnel.
1. Remove two clamps (Figure 1, Item 2) and hose (Figure 1, Item 1) from engine oil cooler (Figure 1, Item 8).
2. Loosen nut (Figure 1, Item 6) and disconnect hose (Figure 1, Item 5) from engine oil cooler (Figure 1, Item 8).
Remove O-ring (Figure 1, Item 7) from hose. Discard O-ring.
3. Remove four clamps (Figure 1, Item 10), two hoses (Figure 1, Item 9), and hose (Figure 1, Item 11) from
engine oil cooler (Figure 1, Item 8) and engine (Figure 1, Item 17).
4. Loosen nut (Figure 1, Item 13) and disconnect pipe (Figure 1, Item 12) from engine oil cooler (Figure 1,
Item 8). Remove O-ring (Figure 1, Item 14) from pipe. Discard O-ring.
5. Remove two bolts (Figure 1, Item 3) and washers (Figure 1, Item 4) from engine oil cooler (Figure 1, Item 8).
6. Remove two bolts (Figure 1, Item 15), washers (Figure 1, Item 16), and engine oil cooler (Figure 1, Item 8)
from engine (Figure 1, Item 17).
Figure 1. Engine Oil Cooler.
0024
END OF TASK
0024-2