TM 5-3805-255-14
0067
DISASSEMBLY CONTINUED
00067
3. Remove retainer (Figure 5, Item 1) and seal (Figure 5, Item 2) from column jacket (Figure 5, Item 4). Use a
suitable puller to pull old bushing (Figure 5, Item 3) from column jacket.
Figure 5. Seal and Bushing Removal.
067
END OF TASK
CLEANING AND INSPECTION
00067
1. Thoroughly clean and inspect all metal parts IAW General Maintenance Instructions (WP 0019) in clean
solvent and dry with compressed air.
2. Inspect column upper bearing and lower bushing. Replace if necessary.
END OF TASK
0067-5
