TM 5-3805-255-14
0114
ADJUSTMENT CONTINUED
000114
16. Remove carrier (Figure 37, Item 1) from holding fixture. Position assembly with back face of ring gear (Figure
37, Item 5) facing up.
17. Hold jam nut (Figure 37, Item 3) and turn adjusting screw (Figure 37, Item 2) until thrust block (Figure 37, Item
4) is pressed firmly against back face of ring gear (Figure 37, Item 5).
18. Back off adjusting screw (Figure 37, Item 2) until recommended clearance of 0.010 to 0.015 in. (0.254 to 0.381
mm) is obtained.
19. Hold adjusting screw (Figure 37, Item 2) and tighten jam nut (Figure 37, Item 3) securely.
20. Recheck thrust block-to-ring gear clearance for a full rotation of ring gear.
Figure 37. Thrust Block Clearance Adjustment.
0114
0114-28
