TM 5-3805-258-24-2
VEHICLE SYSTEMS
DISASSEMBLY AND ASSEMBLY
PILOT CONTROL VALVE
REMOVE PILOT CONTROL VALVE
5059-11
WARNING
3. Remove the caps or plugs from the end of the
hoses. Connect hoses (1) and hose (2) to the
pilot control valve.
4. Close the access panel on the exterior right
side of the cab.
To prevent personal injury release the pressure
from the hydraulic system before any lines are
5. Remove the air from the hydraulic system.
removed or disconnected.
REMOVE THE AIR FROM THE HYDRAULIC
SYSTEM.
1. Open the access panel on the exterior right
side of the cab.
2. Put identification on lines (1) and (2) for
assembly purposes.
3. Disconnect hoses (1) and hose (2) from the
bottom of the pilot control valve, and put caps or
plugs in the end.
4. Disconnect two linkages (3) from pilot control
valve (4).
5. Remove bolts (5), and remove pilot control
valve (4).
INSTALL PILOT CONTROL VALVE
5059-12
1. Install pilot control valve (4) and bolts (5) that
hold it.
See
2. Connect two linkages (3) to the pilot control
valve.
5-338
