TM 5-3805-262-102-5. TURN SIG NALS AND FLASHERTURN SIGNAL SWITCHThree position switch with indicator.Lever in forward position (away from you): Lamp assembly mounted at topleft of cab flashes on and off signaling left turn. Bulb located inturn signal switch will also flash on and off. You must return lever tocenter position after you have completed the turn to stop lamp assemblyfrom flashing.Lever in center position: Turn signals off.Lever in rearward position (toward you): Lamp assembly mounted at topright of cab flashes on and off signaling right turn. Bulb located inturn signal switch will also flash on and off. You must return lever tocenter position after you have completed the turn to stop lamp assemblyfrom flashing.HAZARD CONTROLPull on control.On (pull out): Pull control out to the right. Lamp assem-blies mounted at top left and right of cab will flash on andoff. Bulb located in turn signal switch will also flash onand off.Off: Turn off flashing lamp assemblies by pulling turnsignal switch lever down or up.2-14
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business