TM 5-3805-290-23-2
CAB REMOVE/INSTALL - CONTINUED
0184 00
REMOVAL - CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury or death
to personnel.
During removal procedure, do not walk or stand under cab. Failure to follow this warning may result in
injury or death to personnel.
N OT E
Ensure that all hoses and wiring harness assemblies are disconnected prior to removal of cab.
Cab weighs 2,100 lb (955 kg).
32.
With assistance, use lifting equipment to remove cab (55) from machine.
33.
Remove lifting equipment from cab (55).
COMPONENT TRANSFER
0184 00
If cab replacement is necessary, transfer all necessary components; refer to appropriate work package.
INSTALLATION
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting equipment. Failure to follow this warning may result in injury or death
to personnel.
During installation procedure, do not walk or stand under cab. Failure to follow this warning may result in
injury or death to personnel.
N OT E
Cab weighs 2,100 lb (955 kg).
Apply a thin coat of clean oil to all O-rings (except AC O-rings) before installation.
Apply a thin coat of PAG oil to all AC O-rings before installation.
Apply antiseize compound to cab bolts prior to installation.
0184 00-10
