TM 5-3805-291-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
0012 00
Table 1. Preventive Maintenance Checks and Services (PMCS) for the 966H Wheel Loader - Continued.
LOCATION
ITEM TO
ITEM
MAN-
NOT FULLY MISSION
CHECK/
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
65
Weekly
Cab Air Fil-
(Cont)
ters
WARN I N G
Particles blown by compressed air are hazardous. DO NOT
exceed 15 psi (103 kPa) nozzle pressure when drying parts
with compressed air. Use a maximum of 30 psi (207 kPa)
when cleaning components. DO NOT direct compressed air
against human skin. Failure to follow this warning may
result in injury. Make sure air stream is directed away from
user and other personnel in the area. To prevent injury,
user must wear protective goggles or face shield.
g. Clean air filter with compressed
air. Filter may also be washed in a
solution of detergent and water.
Dry thoroughly.
N OT E
Do NOT reinstall any damaged air filter component. If air
filter or angle bracket are damaged or gasket sealing is not
OK, filter will not function properly to remove dust from
inside cab.
h. Inspect air filter for torn or other-
wise damaged pleats. If damaged,
obtain a replacement from Unit
Maintenance.
i. Install air filter on left side of cab.
j. Close filter access door on left side
of cab.
a. Check if bolts are loose.
Bolts are loose.
66
Weekly
Wheels and
Tires
0012 00-35
