TM 5-3805-291-23-2
HANDRAILS, LADDERS, AND STEPS REPLACEMENT - CONTINUED
0134 00
CLEANING AND INSPECTION
WARN I N G
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low-
toxic material. However, it may be irritating to the eyes and skin. Use protective gloves and gog-
gles. Use in well-ventilated areas. Keep away from open flames and other sources of ignition. Fail-
ure to do so may result in injury or death to personnel.
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pres-
sure when drying parts with compressed air. DO NOT direct compressed air against human skin.
Make sure air stream is directed away from user and other personnel in the area. To prevent
injury, user must wear protective goggles or face shield. Failure to follow this warning may result
in injury to personnel.
1.
Clean all parts and surfaces with solvent cleaning compound.
2.
Dry parts with compressed air.
3.
Inspect all parts for damage, wear, pitting, cracks, or corrosion and replace if necessary.
INSTALLATION
1.
Install plate (48), four washers (47), and bolts (46) on machine.
2.
Install plate (45), four washers (44), and bolts (43) on machine.
0134 00-7
