TM 5-3805-291-23-2
HYDRAULIC SYSTEM OIL FILTER BASES REPLACEMENT - CONTINUED
0155 00
REMOVAL
Hydraulic Filter Base
0155 00
1.
Disconnect switch (1) and remove two O-rings (2) from hydraulic oil filter base (3). Discard O-rings.
427-C0540
2.
Disconnect two hoses (4) and remove two O-rings (5)
from hydraulic oil filter base (3). Discard O-rings.
3.
Remove four bolts (6) and washers (7) from mounting
bracket (8) and remove hydraulic oil filter base (3)
from machine.
4.
Remove two fittings (9) and O-rings (10) from
hydraulic oil filter base (3). Discard O-rings.
5.
Remove cap (11), fluid sampling valve (12), O-ring
(13), elbow (14), and O-ring (15) from hydraulic oil
filter base (3). Discard O-rings.
0155 00-2