TM 5-3805-291-23-2
IMPLEMENT HYDRAULIC HOSES, LINES, AND FITTINGS REPLACEMENT - CONTINUED
0156 00
REMOVAL - CONTINUED
Coupler System - Continued
0156 00
34.
Remove bolt (52), washer (53), and clip (54) from
machine.
35.
Disconnect hose (55) from fitting (56) and remove
hose from machine.
36.
Remove O-ring (57) from hose (55). Discard O-ring.
37.
Remove fitting (56) from valve (58).
38.
Remove O-ring (59) from fitting (56). Discard O-ring.
427-C1286
0156 00
Third Function System
1.
Disconnect two hoses from tilt cylinder (60) (WP 0152 00).
2.
Remove four bolts (61), washers (62), two flange halves (63), and hose (64) from machine.
3.
Remove O-ring (65) from hose (64). Discard O-ring.
4.
Remove two bolts (66) and washers (67) from bracket (68) and hose (69).
5.
Remove hose (69) from main hydraulic control valve and machine (WP 0157 00).
0156 00-9
